Helmar Crackle Medium (Step 1 and 2)

 

• Sizes - 3.38 fl. oz. and 8.45 fl. oz.
• Mediums-  paper, wood, glass, plastics, metal ceramics and more.  Refer to Helmar Adhesives Easy Selection Chart.
• Instructions: 

1. Always test before use.
2. Make sure surfaces to be adhered are clean & dry
3. Using a soft brush apply Helmar Crackle Step 1 over the entire surfact to be treated and allow to dry.  Helmr Step 1 will remain tacky to touch after drying.  Drying time approximately 10-20 minutes.
4. Liberally apply Helmar Crackle Step 2 with a soft brush.  A little bit of experimenting with the thickness of the coat will be required to create your desired crackle effect.
5. Leave to dry overnight.
6. To highlight crack wipe the surface with a small amount of ink/linseed oil.  Gently wipe away excess color leaving the pigment behind in the cracks.

• Dry Time - Step 1 10-20 minutes.  Leave Step 2 to dry overnight.
• Helmar Products are ACMI certified to ensure our products are the safest they can be.
• Type of Jar -Remember to close and tighten after use to avoid drying.
• Where you can purchase it - List of Helmar Preferred Retailers on Blog: www.helmarusa.typepad.com (left side) 
• Wholesale retailers contact - info@helmarusa.com
• Tips:  Can speed up dry time on Step 1 with heat gun but be careful not to overheat or you will get bubbling.  We recommend letting Step 2 air dry.  It's a product you will want to experiment with to find out what else it can do!