- Size - 1.06 oz. tube
- Mediums- metals, wood, paper, buttons, flowers, photos. Refer to Helmar Adhesives Easy Selection Chart.
- Instructions:
- Ensure clean surfaces (no wet surfaces)
- Place drop and ensure good surface contact
- Place down
- Dry Time - Touch dry is 10 minutes but 48 hours to fully cure.
- Helmar Products are ACMI certified to ensure our products are the safest they can be.
- Open Tube - Foil sealed. Use Lid to puncture top.
- Clean up -Remove excess with mineral turpentine. Cured Scrap Dots difficult to remove but could be carefully removed using a sharp blade.
- Where you can purchase it - List of Helmar Preferred Retailers on Blog: www.helmarusa.typepad.com (left side)
- Wholesale retailers contact - [email protected]
- Tips: To increase height of Scrap Dots just add to first layer and continuing to build layers. Place on project and do not flatten.
- Storage - Lightly squeeze tube until product appears at the end of the nozzle then secure cap immediately otherwise a cured plug will form on the top of the tube making it difficult to use the product again but you can remove the hardened part. Always re-cap.
Product Spotlight on YouTube - Helmar Liquid Scrap Dots
Helmar Product Spotlight LIVE on Ustream with Tracy Weinzapfel featuring Liquid Scrap Dots
